Steel Tube Manufacturer,Factory in China steel-tube-china

We are steel tube manufacturer,factory in China.We produce black steel tube,galvanized steel tube.Size from 15×15-400×600. 15mm-273mm

Your position：Home > Steel Tube Manufacturer,Factory in China > JIS G3444 Steel Pipe
JIS G3444 Steel Pipe

JIS G3444 Steel Pipe

TIME:2018-06-07

Brief introduction

Leading manufacturer of JIS G3444 stk400 stk500 steel pipe in China,we can offer the variety of JIS G3444 specifications for your choice.

Consultation & Contact
<
Detailed parameters

Detail of JIS G3444 Steel Pipe 

1.Size : OD 1/2”–1 1/2”  Length: as you required. ( L < 12m )

2.Quality Standard: JIS G3444

3.Surface Treatment: galvanized , oiled, painted , bare.

4.End Treatment: plain or threaded both end with one end plastic cap one end coupling.

5.Test:chemical component analysis, mechanical properties ,technical properties , exterior size inspection.

6.Application:structure,water,gas,furniture making and so on.

7.Payment Term: T/T , L/C,western union.

8.Packing: in bundle or wrapped with water-proof pvc cloth.

9.Shipping.: bulk or load in containers.

10.Chemical Analysis and Mechanical Properties

Table 1. Chemical Composition
Unit:%
Symbol of grade C Si Mn P S
STK290 – – – 0.050 max. 0.050 max.
STK400 0.25 max. – – 0.040 max. 0.040 max.
STK490 0.18 max. 0.55 max. 1.65 max. 0.035 max. 0.035 max.
STK500 0.24 max. 0.35 max. 0.30 to 1.30 0.040 max. 0.040 max.
STK540 0.23 max. 0.55 max. 1.50 max. 0.040 max. 0.040 max.
Notes

a)  If necessary,alloying elements other than specified in this table may be added.

b)  For the tube of grade STK540 exceeding 12.5 mm in wall thickness,the chemical composition may be subject to the aggreement between the purchaser and the manufacturer.
Table 2. Mechanical Properties
Symbol of grade Tensile strength      N/mm² Yield point of proof stress              N/mm² Tensile strength in weld zone         N/mm² Flattening Bendability
Distance between plates(H) Bend angle Inside radius
Applied outside diameter
All outside diameters All outside diameters All outside diameters All outside diameters 50 mm max.
STK290 290 min. – 290 min. 2/3 D 90° 6 D
STK400 400 min. 235 min 400 min. 2/3 D 90° 6 D
STK490 490 min. 315 min. 490 min. 7/8 D 90° 6 D
STK800 500 min. 355 min. 500 min. 7/8 D 90° 6 D
STK540 540 min. 390 min. 540 min. 7/8 D 90° 6 D
NOTE 1 D of this table is the outside diameter of the tubes. NOTE 2 1 Nmm²=1MPa

Tel: +86 18202256900 Email: steel@fwssteel.com

相关推荐
Name：
Email
Leave a message: